Wholesale motor components in a place you can reply on
Wholesale of standard and nonstandard motor accessories
You can select a suitable material for machining based on your actual requirements and part properties.
Brass worm
Plastic gear
Reduction gearbox
Plastic worm
Reduction gearbox
Wire-wound rotor
Since some of our customers will inquire with us to purchase related accessories, we also carry out the business of selling accessories. You can get moderate price.
Metal Materials
Aluminum, copper, iron, stainless steel, 45 gauge steel, etc.
Non-metal materials
Nylon, turning of various rods such as polyfluoroethylene.
Turning and punching
Precision lathe turning and punching, small dimensional error, high precision.
One-piece molding
Machining center production, one-piece molding, stable structure, smooth inner hole without deformation.
Excellent material selection
Not easy to oxidation, the appearance of clean surface as one, bite stable, high efficiency
Estimated Cost
Customize Fee
For some unusual products, additional abrasive costs may be incurred. This cost will need to be priced by our engineers and material supplier’s accounting.
Sample Fee
We can provide free samples of up to five. If you need more samples, you will pay petty expenses. We will credit this sample fee when you place your official order.
Shipping Fee
The shipping fee from the China shipping company warehouse to your company will be paid by you. If you have another way, we will coordinate with you.
Payment Term
30% initial payment should be paid before order materials, and the balance will be paid before shipment.
Need More Specific Details?
Estimated Produce&shipping Time
We try to schedule each order as quickly as possible. Our staff will follow up your order in real time and keep in close contact with the factory as a way to avoid delays that may occur. Let’s take a brief look at the process.
Step 1
Order materials and production time (7-15 days)
It usually takes 7-15 days to order materials. After receiving the material, our factory will check it is in good condition and arrange production.
Step 2
Package Time（1-2days）
After the products are finished, the staff will do the boxing work in the shortest possible time.
Step 3
Loading time （3-7 days）
Our staff will send the loaded goods to the designated warehouse of the shipping company and handle all the work matters before loading. The specific sailing time is subject to the arrangement of the shipping company. Under normal circumstances, the ship will depart within 1-2 weeks.
Step 4
Express, air, land and sea freight times
The specific timeframe differs for different modes of transportation. During the transportation of the goods, our staff will keep you informed of the exact destination and location of the goods.
Need Sample Before Order?
Before placing the order, how can you determine if the motor meets the requirements? You need to get samples to verify the quality is acceptable. Elmotorio can supply a few free samples for you.
If the sample doen’t suit for your enginee or needs to be improved, please give us your opinions in time. We will slove the related and re-samples as soon as possible.
Whole production process
Raw Materials
Winding
Testing
Punching
Rotor Welding
Spray Code
Rotor Making
Maganization
Package
End cap:Product drawing outsourcing casting blank parts, castings qualified into the factory, for machining. Process route: Casting – turning – drilling
Machine base: Product drawing outsourcing casting blank parts, castings qualified into the factory, for machining. Process route: Casting – lock or turning – milling – drilling – tapping.
Stator winding: Outsourcing enameled wire for winding according to the product specification drawing requirements.
Stator rotor punching: Outsourcing electrical silicon steel plate cylinder coil material, cut the ordered material according to the process material arrangement chart, and then carry out the drop material punching slot. Process route: ordering material – drop material – punching slot
Stator core with winding: After the stator punching sheet is stacked and cleaned by hydraulic press and process tooling, the stator coil is embedded with the rapped stator coil, wired and tested for ground voltage breakdown, and insulated after passing the test. Insulation treatment through the equipment for dipping paint, baking process means to improve the insulation of the motor. Process route: piece – stacking – cleaning – inlay – wiring – test – dip baking – sand paint.
Casting aluminum rotor: Aluminum ingots are purchased, dissolved in medium frequency furnace, die-cast by die-casting machine, and secondary cast shaft. Process line: sheeting – die-casting – cleaning – secondary heat sleeve.
Rotor shaft: Outsourcing billet round steel, ordering material according to process size, adjusting heat treatment process according to technical requirements of drawings, and mechanical processing. Process route: ordering material – heat treatment – punching center hole – turning – grinding – milling
Rotor: After the cast aluminum rotor is heat-sleeved and qualified, it is turned and machined in the outer circle and calibrated for dynamic balance. Process route: Turning – cleaning – calibration of dynamic balance – painting.
Stator assembly and assembly: Use the stator press to press the core of the stator with winding into the cavity of the machine base, carry out junction box assembly, rotor threading, pressure bearing and other assemblies. Then the motor factory performance test, the test passed can be surface painting, otherwise re-servicing the motor. Process route: stator pressed into the chassis – assembly – test – painting – into storage.
Other parts: According to the different specifications of the motor required to be equipped with small parts for processing
Frequently Asked Questions
We supply DC motors and geared motors from 6 to 80mm. Motors for the automotive field are our strength. For other motors can be customized through us, and we can find the most suitable resources for you.
Our business is mainly based on wholesale. As a trading&manufacturing Combo., we may not be able to meet the requirements of some small retail buyers. Usually the minimum order quantity is 1000, and we can accept 500pcs for trial order.
Of course, we can certainly support such service. You just need to provide the corresponding number or content to us, adn we will arrange to change the spray code.
Please let us have the specifications of the specific motor and the material so that we can estimate the price. We don’t over cost and we strive to be realistic. We can check the most moderate price according to the customer’s requirements.
We also will meet some clients have demand of accessories, so these accessories are included in our business.
Welcome to consult us
Address
3D-03, 3/F, Building A (Lobby B), Wanxin Commercial Plaza, No.22 Center Road, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China
info@elmotorio.com
Phone
+86 13066810201
